Home Office via Citrix Workspace App on Raspberry PI OS Bullseye arm64

The Raspberry Pi 4 single board computer supports dual screen configurations and thus has become a silent, serious candidate for Home Office work.

I am using a Raspberry Pi 4 4GB, with Raspberry PI OS Bullseye, 2x screen with an USB speakerphone with hardware echo cancellation. The assumption is that Raspberry PI OS is installed with the LXDE-pi desktop and that the displays are working.

The previous guide was for Buster

You can find this guide here: Home Office via Citrix Workspace App on Raspberry PI OS Buster It contains additional information in how to set up echo cancellation with for a cheap speakerphone that is unable to do that in hardware via pulseaudio. I bought a second, more expensive speakerphone that supports hardware echo cancellation and it is a lot better than the previous setup with pulseaudio.

Also, the setup in buster is way more complicated than in Bullseye, even when using multiarch.

What you will find in this HowTo

Ths HowTo uses nano as text editor. So wherever you see nano you can use a different editor.

Positives and Negatives

Raspberry Pi OS arm64

Why arm64 and not armhf? Well there are some synthetic benchmarks in the net that show a performance benefit. I don’t have a prove, but overall the 64bit version seems to behave a tinty bit “snappier” and there is of course the chance to try out multiarch …

So I did a re-install with the Raspberry Pi arm64 image Raspberry Pi OS (64-bit) and also followed the steps to install the chromium armhf version to have support for streaming media that requires content protection.

Compared to Buster the Bullseye release has matured a lot on the Raspberry Pi hardware.

Multiple screens

The Mutter window manager provides the right hints to the Citrix workspace app. The only thing I had to do was to activate two screens in /boot/config.txt

sudo nano /boot/config.txt

Add the line:

max_framebuffers=2

Citrix Workspace App Installation

The Citrix Workspace App can be downloaded via the Citrix homepage.

Citrix Workspace app for Linux (ARM HF)

Navigate to Available Downloads → Debian Packages → Full Packages and click Download file

Since version Dec 12, 2019 the package can be directly installed via gdebi package manager. All required packages will automatically be downloaded. To install open the Downloads folder in the file manager, right-click on the icaclient*.deb package and install the package.

After the install several libraries are missing to get audio and video working. So you need to install some additional packages that are missing in the armhf architecture:

sudo apt install gstreamer1.0-libav:armhf gstreamer1.0-plugins-base:armhf gstreamer1.0-plugins-good:armhf gstreamer1.0-plugins-bad:armhf gstreamer1.0-plugins-ugly:armhf libc++1:armhf libcanberra-gtk-module:armhf libcanberra-gtk3-module:armhf libwebkit2gtk-4.0:armhf

I had a bit of a struggle to get the microphone working in Citrix Workspace and I think the solution was to install pulseaudio for armhf to pull in all the dependencies and then to reinstall pulseaudo for arm64 (which got removed by the armhf version).

Install pulseaudio:armhf

sudo apt install pulseaudio:armhf

Re-install pulseaudio:arm64 to actually have working audio after a reboot.

sudo apt install pulseaudio

The Citrix workspace app provides a script if all necessary components are installed, run:

sudo /opt/Citrix/ICAClient/util/workspacecheck.sh

You now can launch Citrix Workspace via Menu → Others → Citrix Workspace